6 Ways to Turn on Laptop Without Power Button

In the modern world, everyone must secure their bank accounts, email addresses, and vital documents. Safety is an important problem. Furthermore, a lot of folks typically keep all these crucial items on their laptops or personal computers. These days, computers play a crucial role in almost every aspect of our lives.

Whether it be for our education, jobs at the office, leisure, etc., we have a lot to do with that. What happens, though, if your laptop suddenly stops operating and you are unable to turn it on using the power button? That certainly seems like a nightmare! However, you have our support. We have got you ways to turn your laptop on without the power button.

Reasons the laptop is not turning on?

Windows laptop

Make sure that the battery and power connector are plugged in correctly. The most common cause of laptops that won’t power on is a disrupted power supply. A faulty power jack might be the only issue. However, internal components are probably the problem if your laptop still won’t switch on.  If your laptop won’t turn on when you click the power button, one of the following components is probably broken: the power supply, battery, RAM, motherboard, or video card.

How to install a new power button?

Choosing to replace the broken switch with a new one is an option if your power button isn’t functioning:

  • Removing the power source and battery
  • Take away the RAM and hard disc.
  • Do away with the keyboard frame.
  • Finding the power button requires removing the top frame.
  • Put a new switch in place of the broken one.
  • Reassemble the laptop back together.

If you don’t have much experience with computer hardware, this method can become a little complex and go bad rather quickly.

Continue reading the following section for six quick ways to switch on your laptop without a power button if you’re looking for a quick way to start it up.

Laptop Power Button Not Working: 6 Solutions

How to Switch on the laptop using the motherboard

Even if the laptop’s power button is fully broken, this technique will still function. You should take the following actions:

  • Remove the charging wire from the device.
  • Search for the power button by opening the laptop casing.
  • Remove the power button.
  • Look under the button for the 3 to 6 pins.
  • To short circuit pins 1 and 3, use any conductor (such as a screwdriver), Use a wire to connect the pins.
  • Wait for your laptop to start up.

This method can harm your motherboard and laptop chassis, so it is not advised to use it every day to turn on your laptop.

How to turn on the Laptop using a wall socket

Laptops from Dell, Toshiba, ASUS, Acer, Lenovo, and HP operate effectively using this technique. If you don’t want to short-circuit your laptop since it lacks a power button, this solution is also great for you.

  • The motherboard’s power button is connected to by a cable, which should be disconnected.
  • Take out the laptop battery.
  • It turns on when you plug the laptop into a wall outlet.
  • If you want to unplug your laptop from the outlet, replace the battery in it.

In order to turn your laptop on when it is connected to AC power, certain laptops require you to configure the BIOS.

How to Switch on the laptop using the laptop lid

In contrast to how a laptop typically operates, which only enters Sleep mode when the lid is closed, you can change the settings so that the lid is used to switch the computer on or off:

  • When the laptop starts, press “F2,” “F10,” or “DEL” to launch BIOS.
  • the phrase “power management”
  • Possibly adjusting the “power on with open lid” setting is necessary.

How to turn on Laptop using the keyboard

Enable the BIOS (Basic Input/Output System) on your laptop to function as a backup power button even before you encounter a power button issue (which is rather typical). Here’s how to start a PC with a keyboard in Windows 10:

  • As soon as the laptop boots up, hit “F2”, “F10”, or “DEL” to access the BIOS.
  • Input the “power management” settings’ location. There may be a different choice for “power on by keyboard” depending on the manufacturer.
  • Save the settings after configuring the backup power keys.
  • Check the BIOS settings on your laptop after turning it off.

In order to avoid using the trickier techniques on this list, use this strategy more as a preventative precaution

How to turn on Laptop using the clock battery method

You should practice with caution because the clock battery method needs a lot of technical skill:

  • The motherboard’s battery cable must be disconnected; it is not the charging cable.
  • From the motherboard, disconnect the clock battery.

You may turn on your laptop while it is connected to any power source using this cold-start technique. It will also force your laptop to reset to its factory default settings, so keep that in mind as well.

How to turn on Laptop using wake-on LAN

Another precaution for problems with the power button is called wake-on-LAN.

  • When the laptop starts, press “F2,” “F10,” or “DEL” to launch BIOS.
  • Introducing “power management”
  • Set your chosen startup keys for your laptop and enable Wake-on-LAN.
  • then restart after saving the settings.

This method won’t function properly unless you configure your network card on a different laptop or computer.

  • The “Device Manager” window
  • Select “Properties” from “Network Adapter” after accessing it.
  • Choose “Allow this device to wake the computer” under “Power Management” after entering the command.
  • Set “Wake on magic packet” to “on” under “Advanced.”

Additionally simple for Mac users:

  • Switch to System Preferences.
  • Turn on “Wake for network access” in “Energy Saver.”
  • Once you have done so, check your router’s configuration to see if there are any WOL settings. If not, you must configure your port forwarding settings or download a DNS app for your smartphone.

Your laptop can be remotely started using this technique.

Conclusion

Due to a broken power button, is your laptop now completely useless? However, there’s no need to panic because there are various ways to restore your laptop to working order! Using an extra keyboard, turn on LAN, or plug a Windows laptop into a wall outlet are all options. On a Mac, wake-on-LAN is an option as well. You can fix all of your issues with these techniques. You must give them a try!

LEAVE A REPLY

Please enter your comment!
Please enter your name here